How to control the humidity of the pig house

How to control the humidity of the pig house

First, increase ventilation

The ventilation in the pig house can only remove excess moisture from the house and reduce the humidity.

Measures: 1. Raising the production bed to increase the distance between the piglet and the wet ground; 2. Increasing the area of ​​the window and increasing the ventilation of the pig house; 3. The ventilation of the ground is better than the ventilation of the windows on the ground, so the increase Window, can be blown directly to the ground, can better discharge water vapor; 4, install the fan, increase air flow, the effect is most obvious when the pig house is dry.

Second, control the use of water

In moisture-sensitive pig houses (such as the delivery room and pre-care stage), water should be controlled to reduce surface water accumulation and effectively control the moisture of the farm.

Third, ground lime

Laying lime on the floor, using the characteristics of moisture absorption of the quicklime, make the local air in the pighouse dry. And, quicklime also has the function of disinfection.

Fourth, baking dry planks

In order to prevent diarrhea in piglets, it is very effective to often use wood stoves laid on stoves to dry them with stoves, or to give pigs dry cloths or carpets for a few days before their birth.

Fifth, laying low-temperature water pipes

In the piggery, there are several water pipes below 20°C. The water vapor inside the pig house will turn into water droplets. Flowing down the pipes and doing a good job of drainage can also reduce the degree of moisture in the pig house.

Sixth, other

Raising the stove in the pig house and installing air conditioners can control the degree of moisture in the pig house.

Plate Hole

Laboratory Consumables Deep Well Plates is used for culturing cells or bacteria, with 6 wells, 12 wells, 24 wells, 48 wells and 96 wells. Similar to clear microplates, but for a very different purpose. Laboratory Microplates of medium to the wells of the culture plate, and then carry out cell culture in a suitable environment. Generally, the culture plate has a flat bottom, which is suitable for the suspension culture of cells and tissues, and also has aU-bottom microplate and a Round deep hole plate. After surface modification treatment, it can have cell adherent culture and growth characteristics.

Plate Hole

Laboratory Microplates,U-bottom microplate,Sterile deep well plate,Laboratory Consumables Deep Well Plates,Round deep hole plate

Jiangsu HXRT MD Co.,Ltd , https://www.jshxrtmed.com