Introduction to maintenance techniques for low speed centrifuges

The so-called low-speed centrifuge actually refers to a centrifuge with a rotational speed of less than 10,000 rpm. It is because of its large capacity that its rotational speed will be relatively low, generally between 3000-5000, if it can be locked. The speed of rotation and the efficiency of use can be used according to different usage requirements. The centrifuge of freezing function generally controls the temperature from minus 20 degrees to minus 40 degrees.

In the process of using low-speed centrifuges, there are always some things to be aware of, so in order to extend the life of the machine, our maintenance in daily life is even more important. Below, we will follow Hunan Hengnuo Equipment Co., Ltd. to learn about the maintenance of low-speed centrifuges.

Hunan Hengnuo Equipment Co., Ltd. mentioned that at present, low-speed centrifuges have long been a common type of centrifuge products, and are widely used in industries such as industry, electronics, petroleum, coal, and mineral processing. Therefore, in the process of using low-speed centrifuges, we must know how to maintain and maintain, so as to ensure the normal operation of low-speed centrifuges.

First, use a neutral detergent to clean the centrifuge's dust and residual samples, but special treatment if it is toxic or radioactive.

Secondly, the centrifuge should use a separate socket, and the voltage must be stable, otherwise the centrifuge may be damaged. If it is a desktop centrifuge, it must be placed on a solid, stable, level surface. There must be a certain amount of space around the chassis to keep it well ventilated.

Third, if the glass tube breaks during the centrifugation process, the debris in the centrifuge chamber, casing, etc. should be removed, otherwise the centrifuge will be damaged, or a layer of Vaseline can be applied to the cavity. After the rotor is running for a few minutes, the debris is easily removed with Vaseline.

Finally, after using the centrifuge, especially the refrigerated centrifuge, we must first open the lid, wipe off the condensed water, and then naturally dry it. Before and after the centrifugation, the rotor must be gently placed vertically to avoid collision and rotation. The head itself.

The above points are the maintenance problems of the low-speed centrifuge. We must choose the high-quality centrifuge of the brand when purchasing the centrifuge, and pay attention to the precautions during use, so as to improve the service life of the centrifuge. .

Hunan Hengnuo Original:

Sodium Erythorbate Fcc Grade

Sodium Erythorbate Fcc Grade,Sodium Erythorbate Powder,Sodium Erythorbate Food Additive,Food Grade Sodium Erythorbate

SHANDONG BAISHENG BIOTECHNOLOGY CO., LTD , https://www.baishengbioproducts.com