First, the use of electric heating sandwich pot: Aphrodisiacs refer to drugs used to promote male libido and other sexual functions, and are divided into aphrodisiac food, aphrodisiac Chinese and Western patent medicines, etc. With the acceleration of the current pace of life and the increase of work pressure, the number of patients with sexual dysfunction is increasing day by day, and aphrodisiac is one of the popular industries in medicine.
Our company specializes in providing raw materials for the treatment of ED, such as Tata, Jinyang alkali, Maca, Yohimbine, etc.
Saw Palmetto Powder,Maca Root Extract Powder,Polysaccharide Powder,Sexual Enhancement Materials XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.rhinebioteches.com
1. Before starting the machine, check whether the oil level of the heat transfer oil reaches the specified oil level (150cm under the interlayer).
2. Brush the pot and put in the material.
3. Before starting the machine, first open the upper oil filling valve.
4. Turn on the electric switch, turn on the red switch, and rotate the temperature control knob to the desired temperature (most 180 °C, not more than 280 °C) for normal production.
5. Turn off the electric brake and close the oil filling valve. Turn the handwheel to tilt the pot and unload the material.
Second, the use of electric heating sandwich pot Note:
1. The power supply must be based on the power plus leakage safety device, first add heat transfer oil and reuse.
2. It is strictly forbidden to start the machine without the heat transfer oil in the interlayer.
3. It is recommended to use 350# heat-conducting oil. It is recommended to replace the heat-conducting oil for about 1 year. If the time is not long, the replacement time can be extended as appropriate.
4. After the work is finished, close the oil valve, then pour the body of the pot and pour out the material, taking care not to camber.
5. It is recommended to use a standard copper core power cord of 6mm or more.
6. To keep it clean, the pot should be cleaned once every time it is used.
7. Regularly check the meshing degree of the worm wheel and the worm. If the clearance is too large, it can be adjusted by the bearing on the worm.
8, the machine can not work properly, you can check whether the fuse is blown, or the AC contactor is damaged, it is recommended to replace.
9, oil hole, oil hole, temperature display probe jack.
How to use electric heating sandwich pot and precautions