Thymosin is a hormone secreted from the thymus. Its primary function is to stimulate the production of T cells, which are an important part of the immune system. Thymosin also assists in the development of B cells to plasma cells to produce antibodies. In addition to its role as a major actin-sequestering molecule, Thymosin Beta 4 plays a role in tissue repair.
Aicar Powder,Adipotide Powder,Dermorphin Powders,Bodybuilding Raw Powder Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptide-nootropic.com
Yunfei brand plant pest detector test procedures
(1) Instrument installation
Connect the power cable normally, install the printing paper according to the method described below, turn on the power, the instrument will perform system self-test, the stage will be removed, and it will stop at the working position. The self-test is normal and the instrument can work normally. Press the START button to start the test.
(2) Installation of printing paper
1. Select a thermal paper roll with a width of 57mm.
2. Press down on the center of the printer and the printer cover latches up and remove the printer cover.
3. Put the new paper roll into the paper roll box and release the paper roll so that the paper end is close to the inside of the instrument.
4. Open the print loading handle, load the paper vertically into the printer, pull the paper up and down, and feel free to move the handle. (The thermal printing paper is divided into front and back, please do not install it.)
5. Pass the paper through the paper exit of the printer cover and cover the cover.
(3) Starting the instrument
1. Turn on the power, the instrument starts self-test, the detection slot moves slowly, and waits for the test.
2. The roots, stems and leaves of the plant are cut and placed in a mortar, the number is about one-third to one-fifth of the volume of the mortar; it is ground with a grinding rod.
3. Draw an equal amount of 3-5 drops of five kinds of indicator liquids with a dropper, drip into the mortar containing the stems and leaves of the plants, stir evenly, and let stand for 2-3 minutes.
4. Rinse the dropper with water and then aspirate the mixture of indicator and plant debris a little, evenly spread on the indicator strip, and place the indicator strip into the test slot with the colored bars facing up.
5. Gently press the “Test†button. After the “beep†sound is heard, the tester starts to detect. The test slot and indicator bar are slowly moved to the instrument and then returned. At this time, the instrument starts to automatically print the test result. (Note: Press “↑†after the test, the stage is indented.)