Multi-function cutting machine installation and use environment requirements

Multi-function cutting machine installation and use environment requirements

First, the installation environment requirements of the multi-function cutting machine :

1, must be maintained in a stable 380V commercial power supply environment, and because of the high power, some large enterprises use more than 2KW of power, so the circuit used must be safe and secure, can safely support the normal operation of the machine.

2. There must be a pipeline for normal water supply and discharge. The multi-function vegetable cutter machine needs to discharge certain vegetable juices during work, and needs regular flushing to ensure the sanitation of the working environment.

3, must be kept in a spacious environment, in the process of cutting vegetables, will accumulate a lot of vegetable juice and vegetable juice, such as the environment is not spacious enough, easy to induce accidents.

4. Try to keep the environment ventilated. During the working process of the machine, a lot of debris and water mist will be generated, and the machine will generate a certain amount of heat. Keeping the ventilation will reduce the temperature of the working space and keep the vegetables fresh.

Second, multi-purpose cutting machine use precautions and maintenance:

1. Place the multi-function cutting machine on the level ground before operation to ensure that the multi-function cutting machine is placed smoothly and reliably; make sure that the multi-function cutting machine has good plug contact, no looseness and no trace.

2. Check if there is any foreign matter in the rotating barrel or on the conveyor belt. If there is foreign matter, it must be cleaned to avoid damage to the tool.

3. Operate and adjust the cutting mode according to the vegetables to be processed. The centrifugal slicer is used for slicing the hard vegetables of the melon and the potato, and the vertical knife part can process the leaf soft vegetables or the cut pieces into pieces of different specifications. Ding, diamond and other shapes.

4. Install the vertical knife, first turn the adjustable eccentric wheel to make the knife holder go to the bottom dead center, then lift the knife holder upwards 1-2 mm, so that the vertical knife contacts the conveyor belt, tighten the nut to the vertical knife Fasten to the knife holder. If the turret lift height is small, there may even vegetable knife, multi-purpose shredder if turret lift height is too large, it is possible to cut bad conveyor belt.