Diagnostic Equipment,Hpv Dna Sequencing,Clinical Dna Gene Sequencer,Pcr Molecular Test Nanjing Superyears Gene Technology Co., Ltd. , https://www.superyearsglobal.com
1, installation instructions (1) must ensure that all water in the system can flow through the electronic water treatment.
(2) The water flow of the electronic water processor has no directionality, and the user can set the entrance and exit according to the needs.
(3) A separate filter is required to use the electronic water processor.
(4) Series electronic water processors generally do not have a bypass, and filters installed separately should be backwashed regularly.
(5) The electronic water processor can be installed vertically, horizontally or obliquely.
(6) The main unit and the auxiliary unit can be installed integrally or separately. When the split is installed, the host can be moved to a place where it is easy to observe and maintain. The connection coaxial line between the main and auxiliary machines is generally less than 5 meters.
(7) The new system and the old system with serious fouling must be cleaned and installed.
(8) Please pay attention to protect the anode inside the water processor when installing the electronic water processor. Do not bump.
2, installation location:
The electronic water processor should be installed after the water pump outlet, close to the piping and water equipment to be treated.
(1) A chiller type central air conditioning system in which an electronic water processor is installed on a pipeline for cooling circulating water and refrigerant water.
(2) Heat pump unit type central air conditioning system, an electronic water processor is installed on the refrigerant water pipe.
(3) Industrial cooling system, an electronic water processor is installed on the pipeline in front of the equipment that needs cooling.
(4) A heat exchange system in which an electronic water processor is installed on the hot return water line and the cold water supply line.
(5) A hot water boiler system in which an electronic water processor is installed on the cooling water pipe and the hot water supply pipe.
The power supply for the electronic water processor equipment is 220V/50HZ, and only the 220V three-pin socket set near the electronic water treatment installation is required.
3. Installation steps (1) For the new system, the installation location should be reserved in the design according to the size of the selected electronic water processor. For the old system, the installation location should be cut out on the pipe, and the size should match the electronic water processor selected.
(2) Place the two flanges corresponding to the flange of the electronic water processor on the pipe.
(3) Lift the electronic water processor in place with the lifting device.
(4) Install a gasket between the pipe flange and the electronic water treatment flange, adjust the position, fix it with bolts, initially tighten, then weld the pipe flange, and then tighten the bolt after welding.
Electronic multi-function water processor installation instructions
The electronic multi-function water processor is based on the formation mechanism of scale, and uses high-frequency electromagnetic oscillation generated by an electronic circuit to form a high-intensity high-frequency electromagnetic field between fixed electrodes. When the water flowing through the electromagnetic field absorbs the high-frequency electromagnetic energy, the microstructure and physical properties of the water are changed, and the activity of the water is enhanced. This product has little magnetic interference to the outside world, and the effect on water treatment is obvious. Zui finally plays the role of descaling, anti-scaling, sterilization and sterilizing, and slowing down corrosion.
Prev Article
Plantago nutrition knowledge