Vacuum packaging machine operation method

Vacuum packaging machine operation method

1. Turn on the power:
Toggle the power selection switch as needed, that is, the power indicator is on. The power selection switch points to the vacuum for the vacuum seal, and the vacuum is directed to the vacuum inflation seal.
2. Place the vacuum bag containing the item in the vacuum chamber. The bag mouth is neatly placed on the heat seal strip (if at least one nozzle is inserted into the bag mouth for the air-filled package), the bead is placed down and pressed against the vacuum bag mouth.
3. Press the cover and the air pumping (vacuum) indicator on the panel lights up.
The vacuum pump starts pumping, the cover is automatically sucked, and the vacuum knob can adjust the degree of vacuum according to the packaging requirements. When adjusting, the scale is from low to high, the amplitude is small, the pumping indicator is off, and the airing indicator is on. Inflation begins. The inflation knob can adjust the length of the inflation time (that is, the amount of inflation), the method is the same as above. If you do not need to inflate, turn the power switch to the vacuum position, the program will automatically enter the vacuum package, and the charge indicator will go out.
4. When the air pumping or inflation is completed, the indicator light will be extinguished, and the heat seal indicator light will be on, that is, the sealing program will be entered. The heat sealing time and temperature adjustment knob are arranged on the panel to adapt to different thickness materials, and when adjusting the time and temperature, the rotation is performed. The amplitude should be small to prevent the heat seal temperature from suddenly increasing and burn out the heat seal fittings.
5. When the set heat sealing time is reached, the heat seal indicator light is extinguished, so that the heat seal is finished, that is, the vacuum chamber enters the air through the solenoid valve until the cover is automatically lifted, and the vacuum inflation packaging process is completed, ready for the next time. Packaging cycle.

Fire Protection Equipment Power Monitoring System

Fire Protection Equipment Power Monitoring System,Fire Equipment Voltage Current Signal Sensor,Fire Equipment Power Monitoring Module,Fire Equipment Power Monitor

LIAONING YINGKOU TIANCHENG FIRE PROTECTION EQUIPMENT CO.,LTD , https://www.tcfiretech.com