How to raise chickens with biogas

How to raise chickens with biogas

When the chicken grows to a live weight of 0.3 kg or more, it can begin to feed with biogas slurry. General feed can be mixed. Biomass requirements mix, the amount of mix to quit dry is not appropriate.

Take biogas slurry from the digester outlet to take fresh biogas slurry from the middle layer. Take the foam on the surface of the biogas slurry before taking it, take the middle serum, filter it through the gauze, and stir it in the chicken food.

Biogas digesters that have been used for normal gas production and have been used for more than 3 months can be used. No gas pool or diseased pool must be taken for liquid feeding.

The amount of biogas slurry should be appropriate. If the ratio of biogas slurry to feed is greater than 1:1, the chicken will experience diarrhea.

The amino acids, trace elements and other active substances contained in the biogas slurry can effectively stimulate the ovulation function of the hen's ovary and increase the ability to lay eggs.

The hens reared with biogas slurry were laid 20 days ahead of schedule. The laying hens were extended for about 50 days compared to the control chickens. The average egg laying period was 250 days. The hens fed on a single feed had an average egg production period of In 200 days, the former had a 25% increase in egg production rate.

The eggs produced by chickens fed with biogas slurry were weighed at an average of 46.7 grams per egg. Eggs produced from chickens fed with a single feed weighed only 39.6 grams per egg. The weight gain of the former was 17.9 times higher than that of the latter. %. Feeding a hen with biogas slurry can increase income by more than 15 yuan a year.

10000Hz High Frequency LiDAR Module

10000 Hz is one of our 2021 new solutions products,which can be widely used in drone postioning, car anti-collision, intelligent traffic monitoring etc. with high accuracy. We support customized service of different frequency(100hz,200hz,300hz,400hz,1000hz,5000hz,10000hz etc.), you can choose the suitable design. And the LiDAR module is a small size with 43*35*21mm, customers can be integrated to their measure device easily. If you meed any documents(PDF files etc.) of JRT high frequency LiDAR distance sensor, please contact us now.
10000Hz High Frequency LiDAR Module
Some key features may help:
Accuracy: ±3~5cm(<50m) /±1%(>50m)
Range: 0.1-200m
Resolution: 1cm
Frequency: 100/200/400/1k/5k/10khz
Laser type: 905nm,Class I
Size: 43*35*21mm
Weight: 20g
Input voltage: 8-36V

10000Hz High Frequency LiDAR Module,LiDAR,High Frequency LiDAR Module,10000Hz LiDAR Module

Chengdu JRT Meter Technology Co., Ltd , https://www.infrareddistancesensor.com