Introduction to the design features of small barrel mineral water production line

After the semi-automatic operation of the small barrel mineral water production line , the other operation procedures are unchanged, the selection switch is turned to the automatic position, and the automatic opening button is pressed, and the machine automatically and continuously completes the process and various actions according to the selected program. Under normal production conditions, the machine is running in a fully automatic state, or the machine must be stopped. The small barrel mineral water production line can press the automatic stop button, and the machine automatically stops to the cycle starting position after completing this cycle automatically. In case of emergency, press the emergency stop button and the machine will stop instantly. The imported reverse osmosis membrane has high desalination rate, long service life and low operating cost. The automatic pretreatment system is adopted to realize unmanned operation, online water quality monitoring and control, real-time monitoring of water quality changes, safety of water quality, automatic electronic control program, and optional touch screen operation, which is convenient to use.

Personalized design that meets the local water quality, meets the needs in all directions, the barreled pure water production equipment covers a small area, the required space is also small, the reverse osmosis device has a high degree of automation, the operation and maintenance and equipment maintenance workload is very small, and the water treatment Only relying on the pressure of water as a driving force, its energy consumption is low in many processing processes. It does not require a large amount of chemical agents and acid and alkali regeneration treatment, no chemical waste liquid discharge, and no environmental pollution. The gap between the impeller inlet and the pump casing is too large, so that the water in the high pressure zone of the pump flows to the low pressure zone through the gap, which affects the water output of the pump and reduces the efficiency. If the clearance is too small, the friction between the impeller and the pump casing may cause friction. In order to increase the backflow resistance and reduce the internal leakage, and delay the service life of the impeller and the pump casing, a sealing ring is installed at the inner edge of the pump casing and the outer joint of the impeller. The small barrel mineral water production line has the function of filtering the raw water and automatically cleaning and filtering the filter element automatically, and the system continuously supplies water when cleaning the sewage.