Xiongfa Feed Moisture Analyzer, Introduction to Feed Moisture Control In the feed processing process, moisture has a great influence on the individual unit processes of the entire processing program. From the input of raw materials to the output of products, the appropriate moisture content can not only reduce the processing cost of feed, reduce the energy loss in various processing processes and the mechanical loss of processing equipment, but also improve the quality of feed products and feed processing. Efficiency, providing users with reliable feed products. Therefore, each feed processing step has strict requirements on the moisture content of the processed object. When the moisture entering the processed material is too low, the surface quality of the processed pellet feed is smooth and hard, and it is not easy for the animal to digest and absorb, and the processing power is too high, the productivity is low, and the electricity consumption per ton is large; when the moisture is too high, The processed pellets have a rough outer surface and a low molding rate, which is liable to cause mildew and fragmentation during transportation. Generally, the moisture of pelleted feed should not be higher than 12.5%; but it can be no more than 13.5% in the north. If the pellet feed is processed in summer, the high moisture content of the finished pellet is preferably not higher than 12.5% ​​due to the higher ambient temperature. Otherwise it is easy to mold and deteriorate. 2. National Standard Method for Feed Testing Feed moisture is an important test indicator in feed processing. The current measurement method is GB/T 6435-2006 (105 °C constant weight method). (1) Wash the sample dish, bake at 105 ° C for 1 h, cool in a desiccator for 30 min, and weigh. After baking for another 30 minutes, it was cooled and weighed until the difference between the two weighings was less than 0.0005 g. (2) Weigh 2~5g samples and evenly spread them in the weighing dish with constant weight. It is dried in a constant temperature oven at (105 ± 2) °C for 2~4h, placed in a desiccator for 30min, weighed, and then baked for 1h, cooled and weighed. Until the difference between the two weighings is less than 0.002g, it is constant weight. More than 10%, the relative deviation is allowed to be 1%; the water content is 5%-10%, the relative deviation is allowed to be 3%; the water content is above 5%, and the relative deviation is allowed to be 5%. The XFSFY-120B Halogen Moisture Analyzer quickly measures the moisture content and aims to establish a method that is accurate, fast and easy to operate. The Xiongfa Moisture Analyzer has the functions of temperature setting, fine-tuning temperature compensation and automatic control. It is a new generation of rapid moisture measuring instrument developed by the current international pyrolysis principle. Imported automatic weighing display system, humanized system operation, no special training, automatic calibration function, automatic test mode, sampling, drying, measuring one machine operation. The strain-type mixed gas heater achieves the maximum heating power in the shortest time, and the sample is quickly dried at high temperature. The measurement accuracy is high, the time is short, no consumables are used, the operation is simple, and it is not affected by the environment, time drift, temperature drift, and no need for assistance. Equipment and other advantages. This product has been widely cited in the procurement of feed raw materials, moisture testing in feed semi-finished products, feed products, such as: raw materials: corn, wheat, soybeans, straw, sorghum, peanut meal, soybean meal, silage and other semi-finished products: soybean meal, bran Finished products such as glutinous rice, jujube powder, fish meal and distiller's grains: pellet feed, powder feed, forage feed, block feed, etc. Xiongfa XFSFY-120B meat moisture analyzer technical parameters: 1, weighing range: 0-120g 2, moisture measurement range: 0.01-100% 3, HBM weighing system sensor: accuracy 0.001g 4, sample quality: 0.5-120g 5, heating temperature range: start - ~ 180 ° C heating method: imported halogen lamp rapid heating 6, water content readability: 0.01% 7. Display parameters: weight before drying, weight after drying, moisture value, solid content, temperature, test time 8, dual communication interface: RS 232 9. Dimensions: Dimensions: 330*205*165(mm) Length, width and height Packing size: 410*315*335 (mm) 10, power: 220V ± 10% 11, frequency: 50Hz ± 1Hz 12, net weight: 3.6Kg Feed Additives,Tocopherol For Feed Additive,Animal Feed Additive,Feed Additive Vitamin E Allied Extracts Solutions , https://www.alliedadditives.com
Feed moisture analyzer