Red star apple;The largest can reach three or four hundred grams.Good color, ripe apple red, very appetizing;The fruit is round;The fruit is smooth, waxy, and has a lot of powder. When the fruit is first colored, there are obvious intermittent red stripes, followed by red clouds. After fully coloring, the whole fruit is thick red and has obvious purple and thick stripes.The pulp is light yellow, crisp, juicy and sweet.The bigger advantage is that it has a strong aroma, which is that after eating the apple, the mouth can still leave a fragrance.We provide the best quality for the customer, if you have any need, please tell us.
New Crop Red Star Apple,Fresh Red Star Apple,Organic Red Star Apple,Export Organic Fresh Apples Jining Sunagro Trade Co., Ltd. , https://www.sunagro-food.com
The high-frequency oscillating signal emitted by the ultrasonic generator is transmitted to the medium by the transducer to be converted into a high-frequency mechanical oscillation. In the cleaning solvent, the ultrasonic waves are radiated in the cleaning liquid to make the liquid flow. Tens of tiny bubbles. These bubbles form and grow in the negative pressure region in which the ultrasonic waves propagate longitudinally, and rapidly close in the positive pressure region. In this process known as the "cavitation" effect, the bubble closure can form an instantaneous high pressure of more than 1000 atmospheres, continuously generating instantaneous high pressure like a series of small "explosions" constantly impacting the surface of the object, making the object The dirt in the surface and the gap is quickly peeled off, thereby achieving the purpose of purifying the surface of the object.
Let's share the operating procedures of this device:
ready
(1) Check the equipment electrical switch, the instrument indicates, the equipment transmission is normal.
(2) Check if the dial bottle clutch is in the normal position, if it is in the neutral position, please adjust it.
(3) Close the machine power switch, turn on the speed switch, the inverter operation panel fluorescent screen displays the setting frequency. At this time, press the RUN key, the inverter works, and the motor speed gradually reaches the set value. Stop pressing the STOP button.
(4) Run the machine for 2 minutes to check whether the equipment and mechanical transmission structure are normal, whether the operation sound is normal, and normal production.
First open the water inlet valve, fill the liquid storage tank with water, open the valve without water, open the valve for water injection, spray the water normally, open the water pump switch, fill the ultrasonic cleaning tank with water, adjust the water inlet, and make the tank Keep a certain water level (do not open the ultrasonic wave below the water level) and open the air valve. When the water level in the tank reaches the specified water level, the ultrasonic switch is turned on, and the ultrasonic cleaning machine enters the bottle washing state.
(1) The operator puts the vial into the bottle tray and turns on the speed switch to make the speed 10~26Hz (100~400/min 7ML). Press RUN to start production.
(2) When there is a bottle condition, first press the STOP button to stop, check the bottle bottle part, clean the broken bottle in time, adjust the bottle wheel, and then drive production.
(3) When the bottle is turned into the bottle wheel and the track in the bottle turntable, it is strictly forbidden to pour the bottle.
note
(1) Never open the ultrasonic wave without the water level.
(2) After the end of production, the ultrasonic wave must be turned off first, then the water should be discharged.
(3) If the ultrasonic wave does not work, please consult with a professional maintenance person.
(4) To adjust the production volume, set the required operating frequency according to the inverter manual.
(5) It is strictly forbidden to pour the bottle into the track.
The staff should strictly abide by the operating procedures of the ultrasonic bottle washer to make the machine reach a good operating state.
Through the introduction of the above small series, have you learned the correct operation steps of the drum type ultrasonic bottle washer ? I also hope that this article can help everyone.
Correct operation steps of the drum type ultrasonic bottle washer
The drum type ultrasonic bottle washer can meet the cleaning needs of 2-500ml round or shaped bottles, and is widely used in pharmaceutical, food and beverage fields. Under the action of the thrust of the bottle turntable, the bottle is brought into the bottle washing machine by the dial, first enters the ultrasonic water tank for rough washing in the ultrasonic water bath, then enters the fine washing track, and alternately flushes the two waters, one steam or three water and one steam, and can carry out the bottle. It is initially blown dry and cleaned to meet the needs of mass production.
Next Article
Brassica napus
Prev Article
Solution for low yield of mushroom cultivation