Water quality sulfide acidification gas blower should pay attention to the problem during use

Water quality sulfide acidification gas blower is a pretreatment device for water quality sulfide. It is suitable for the detection of water quality sulfide in various environments. This equipment is not complicated to operate, but it must be handled with relative care and care. Beware Careless and damaged equipment.

Now according to the problems that some customers have in the process of use, carry out the system summary and induction. If there are new problems, please contact Qingdao Sunde Environmental Protection Technology Co., Ltd. in time to avoid improper operation and equipment damage.

1. Use and storage of glass fittings

1.1 SN-HS-4 water quality sulfide acidification gas blower has a special glass accessory storage box, care should be taken when taking and storage, glassware is easy to break.

1.2 SN-HS-4 Water Quality Sulfide Acidizing Injector The glass fitting is a sample holding device. After heating, it should be completely cooled before it can be stored and stored.

1.3 During use, keep away from all kinds of hard objects, such as water baths, lifting racks, etc., to avoid breakage caused by collision.

1.4 In order to make the test results more accurate, after use, it should be cleaned up in time to avoid the residual residue affecting the experiment.

2. Use and storage of water bath

2.1 Because the water bath is already in the inlaid equipment, the general small collision will not cause damage to the water bath, but the water bath is relatively fragile when it is just heated or ready for heating. When a hard object hits, it is easy to cause the water bath to rupture. Care should be taken during the heating process.

2.2 After the water bath is completely cooled, it should be cleaned up in time to avoid reducing the service life of the water bath.

2.3 After the water bath is broken, it must be stopped. It must not be disassembled and repaired in private, so as to avoid leakage and other conditions due to improper repair, so as to avoid more serious injury to the operator.

The operation of water quality sulfide is relatively simple. According to the experience of our company for many years, the above problems are common problems that are often encountered by ***. After avoiding these problems, this equipment basically has no problem. Thank you for your choice, Qingdao Suntech Environmental Technology Co., Ltd. will continue to improve the equipment to make the operation easier.

Herbal Extract

Herbal extract is a concentrated solution made by extracting the herb's chemical constituents out of the inert herb fiber (cellulose) with a solution of alcohol and water or glycerin. This process allows the beneficial components of plants, such as antioxidants, vitamins, and minerals, to be extracted and used for medicinal or therapeutic purposes. Commonly used herbs include echinacea, ginseng, turmeric, and milk thistle. Herbal extracts can be consumed in various forms, such as capsules, tinctures, or teas.

According to different extraction methods: the volatile oil, oil, extract, fluid extract, dry extract, active components and active parts obtained from plants for preparation production are all extracts.

Herbal Extract,Herbal Extract Powder,Herbs Extract,herbal extracts,herbs powder

Shaanxi Zhongyi Kangjian Biotechnology Co.,Ltd , https://www.zhongyiherbs.com