Thermo Fisher CO2 incubator operation instructions

Thermo Fisher CO2 incubator operation instructions

How should the Thermo Fisher CO2 incubator be used? The following is explained by the Shanghai Bayu to explain the operation instructions of the Thermo Fisher CO2 incubator, detailing the CO2 incubator temperature setting, CO2 concentration setting, and temperature calibration operation steps. I believe it will be helpful to you. Welcome to the following details!

Thermo Fisher CO2 incubator operation instructions

First, CO2 incubator temperature setting

1. Press “MODE” to “SET” position.

2. Press "←→" until the message "TEMP XX.X" is displayed.

3. Press “↑↓” to set the desired temperature value.

4. Press ENTER to save the set value.

5. Press “MODE” to “RUN” position or press “←→” to select other parameters.

Second, CO2 incubator CO2 concentration setting

The carbon dioxide incubator has a CO2 concentration ranging from 0.0% to 20%. The factory set CO2 concentration is 0.0%. At this concentration, the CO2 control and alarm system will be turned off. Set the CO2 concentration value as follows:

1. Press “MODE” to “SET” position.

2. Press "←→" until the message "CO2 XX.X" is displayed.

3. Press “↑↓” to set the required CO2 concentration value.

4. Press ENTER to save the set value.

5. Press “MODE” to “RUN” position or press “←→” to select other parameters.

Third, CO2 incubator temperature calibration

Just installed machine: stable for more than 12 hours.

Machine in use: After the display temperature reaches the set temperature, the machine must be stable for more than 2 hours.

Calibrate the temperature as follows:

1. Press “MODE” to “CAL” position.

2. Press "←→" until the message "TEMP CAL XX.X" is displayed.

3. Press “↑↓” to enter the measured temperature value.

4. Press the “ENTER” key to save the calibrated temperature.

5. Press “MODE” to “RUN” position or press “←→” to select other parameters.

The above "Semerce Carbon Dioxide Incubator Operation Instructions" is provided by Shanghai Bashu. If you want to know more about CO2 incubator information, you can contact Shanghai Baqi Industrial Co., Ltd.!

Animal Husbandry Materials

Plant extracts can be used in animal husbandry materials. Traditional Chinese medicine extracts can improve animal immunity, survival rate and reproduction rate. Can protect the animal's gut flora from being destroyed,

Animal Husbandry Materials,Andrographis Extract,Amur Corktree Bark Extract,Cortex Phellodendri Extract Powder

Fufeng Sinuote Biotechnology Co.,Ltd. , https://www.sntbiology.com