Condensate recovery device process Condensate recovery unit consists of steam-water injection mixing device, filtration and decontamination device, waste gas reuse device, steam-water flow conversion device, built-in anti-cavitation device, water collector, OMRON high sensitivity liquid level change It is composed of a sensor, an electric control box, and a high temperature and high pressure condensate recovery pump. The condensate recovery unit is used for the recovery of condensed water produced in various soda water heat exchangers or production processes. Condensate is a high-quality water, and it contains a lot of heat, so the recovery of condensate in the steam heating system is one of the important measures to save energy and water. Condensate recovery unit process High temperature water If pumped directly, the negative pressure formed before the pump will vaporize the condensate, causing cavitation. In severe cases, it will burst due to sudden expansion of the gas volume, damaging the pump. Therefore, the traditional method of condensate recovery is to cool it and then pump it. Thus, it is impossible to utilize the large amount of heat energy contained in the condensed water, and since the condensed water is mixed with the untreated cold water, the water quality is deteriorated, and the water treatment is repeated. The condensate recovery unit is designed with cavitation elimination measures to ensure that the pump directly pumps high temperature condensate without cavitation. The cavitation of the pump is solved by a pressure regulating device in the tank, a cavitation eliminating device and a special water pump. Thereby, the complete closed recovery of the high temperature condensed water and the high energy secondary steam is realized, and the volume of the water collecting container is reduced. The automatic control system is used to recover the condensed water in time, so that the energy is wasted low, and the oxygen corrosion is eliminated, and the secondary steam is eliminated. Condensate recovery unit process pneumatic condensate recovery unit features: 1. No need to use external energy such as electricity, only steam or compressed air is needed. 2. There is no cavitation. 3. The temperature of the condensed water is not limited. 4, a small installation space, no need to set up a separate recycling bin. 5. High condensate recovery and low energy consumption. 6, not limited by the power source, there is steam to have condensation. 7, non-electric drive, can be used in hazardous and explosion-proof occasions. Condensate Recovery Process The power mechanical pump is widely used and is a good choice for draining condensate from open storage tanks and collection tanks. 1. No cavitation occurs when high temperature condensate is dispensed. 2. It is safer to use without electric drive or liquid level control. 3. Low lift movement 4. The interior uses a durable INCONEL compression spring. 5. Online replacement of parts, cleaning is very simple and reduces repair costs. 6. High quality stainless steel internals ensure reliable operation of the pump. 7. Compact design minimizes installation space. Veterinary Gloves With Shoulder Protection Shoulder Protection Veterinary Gloves,Colorful Disposable Veterinary Gloves,Inclined Cutting Gloves,Sleeve Shoulder Tight Jinan Mucho Commercial Inc. , https://www.muchovet.com
Condensate recovery unit process