Analysis of the Reasons for the Poor Water Purification Effect of Bottled Pure Water Production Equipment

Bottled pure water production equipment With the improvement of people's living standards, the application of pure water production equipment in China is now more and more. Since water is directly related to our personal safety, we must check and accept according to national standards after purchasing bottled pure water production equipment. But sometimes the water purification effect of the equipment is poor. Today we will analyze the reasons together.

Bottled pure water production equipment operation sequence

1. First think about the compatibility between the agent and the agent, and secondly, consider the compatibility of the drug with the film data. For example, coagulants, bactericides, coagulants, prodrugs and scale inhibitors are often used together in RO systems. In order to avoid fouling of the R0 equipment, the inlet end of the RO is simply thinking about the method of adding the scale inhibitor. These scale inhibitors are all negatively charged. Therefore, the reaction between the cationic coagulant and the anionic anti-scaling agent should be avoided, and the colloidal compound formed by the reverberation should be prevented from depositing on the film surface.

2, bottled pure water production equipment to avoid filter material into the reverse osmosis equipment: select the appropriate filter effluent equipment, to avoid the filter leakage sand leakage activated carbon, select the appropriate activated carbon, to avoid the use of powder removal process.

3. The large-scale water purification equipment using tap water as the water source establishes an independent water supply system, which can ensure the stable operation of the water supply system and reduce the momentary impact on the water supply pipe network of the whole plant when the RO system starts and stops. When the RO equipment directly draws water from the raw water pipe network, high and low pressure maintenance equipment should be set up, because most of the water pipe network pressure is shaken.

Reasons for poor water purification effect of bottled pure water production equipment

1. In terms of the ash removal system. If this joint has an error. No matter what kind of production process you use, the water produced will not meet the standard. Bottled purified water production equipment is a key factor affecting the effect.

2. In terms of operating procedures, the clean water of the water purification equipment is purified according to certain requirements. It is aimed at certain macromolecular substances or ions contained in water, and the demand may vary under different conditions of use in different industries. This is also a key factor affecting the effect.

3, after zui must produce water with higher purity requirements, then it can produce water that meets the requirements, the external environment does not necessarily keep the water clean. After the water is produced, it is likely to be used as a dirty device to affect the quality of the produced water.

Whether the bottled pure water production equipment can last for a long time is important. Maintenance is important, equipment maintenance is careful, and the equipment is satisfactory. Therefore, care should be taken not to damage the machine while the water purification equipment is running.