Misunderstanding of pepper fertilization method

Misunderstanding of pepper fertilization method

The high yield of pepper is inseparable from fertilization, but in actual production, many vegetable farmers lack rational knowledge, and they rely on perceptual experience to arrange production, which is easy to reduce production. Cao Zhengping, a technician of Yangling Modern Agriculture Precision Poverty Alleviation Demonstration Park, specializes in the majority of vegetable farmers, and do not fall into these misunderstandings.

Misunderstanding, the more the pepper is fertilized, the higher the yield, the more the real fertilizer is, the more likely it is to cause the damage.

The total salt content of the soil required for the normal growth of pepper is 2000-3000 mg/kg. If the root system exceeds 6,500 mg/kg, the reverse osmosis will appear and the length will be poor, and the yield will naturally decrease. The temperature in the greenhouse is high, the humidity is high, the decomposition of organic fertilizer is fast, the amount of nitrogen volatilization is large, and the excessive application of fertilizer is easy to cause fertilizer damage.

In general, the average utilization rate of nutrients in various crops is 30%-40% for potassium, 40%-50% for nitrogen, and 10%-20% for phosphorus. According to the characteristics of the fertilizer required by the pepper and the specific fertilizer supply conditions in the shed, scientific and rational selection of high-quality fertilizer, only balanced, comprehensive fertilization, can achieve high quality and high yield of pepper. Within a certain range of fertility, as the amount of fertilizer applied increases, the yield increases.

Misunderstanding, one seedling, more yield, high truth, close planting, low yield

Many vegetable farmers want to stay a few more when they stay in the seedlings, planting some of them, and think that the seedlings are more productive. According to the measurement, 4 peppers per square meter are planted, the plant is 50% nutrient-consuming photosynthetic product, and the fruit can be 50%; if 8 plants per square meter, the vegetative consumption of photosynthetic products is 70%-80%, the product It can only account for 20% to 30%, but dense planting has a low yield.

Misunderstanding, the temperature is high, the temperature is too fast, the temperature is too high, and the production of pepper plants is unbalanced.

Many vegetable farmers believe that the greenhouse is built to keep warm, and the high temperature pepper grows fast. In fact, capsicum has an upper limit on temperature: generally 25 to 32 °C. If the temperature is too high to inhibit the young fruit, fruit breaks will occur. At the same time, the temperature is too high, the respiration is large, the body is running disorderly, the plant body is long, the plant vine and reproductive growth are not balanced, but the yield will decrease.

Misunderstanding, a plant grows well, and the truth of the plant will increase the nutrient accumulation of the product and affect the yield.

Most people think that the plant is a good crop. In fact, the water leaves are too shallow, the nutrient incomplete yield is low, and the excessive growth of nutrients will inevitably affect reproductive growth, but the yield is low. In addition, excessive plant growth will inevitably affect the nutritional accumulation of products, photosynthetic products consume large, and yield is also poor.

Misunderstanding, a dozen drugs, less disease, less truth, fight drugs, will affect the disease resistance of pepper

Many vegetable farmers in the middle and late stages of pepper growth, taking a drug every 2 to 3 days, think that the drug has spread so hard and spread so fast, not to fight hard, it will ruin. In fact, during this period, diligent drugs also interfered with the normal operation of synthetic carbohydrates in crops, and were not conducive to the production of antibiotics in plants, but the disease resistance decreased.

Disclaimer: Some articles on this website are transferred from the Internet. If legal rights of third parties are involved, please inform this website. phone

Zirconium Oxychloride

Product Name: Zirconium Oxchloride

Classification: Other Inorganic Salts

CAS No.: 7699-43-6

Other Names: Dichlorooxozirconium

MF: ZrOCl2.8H2O

EINECS No.:231-717-9

Grade Standard: Industrial Grade, Agriculture Grade.

Purity: 36% Min

Appearance: White or light yellow needles

Specification:

ZrO2+HfO2(min)

36%

35%

SiO2(max)

0.003%

0.003%

Fe2O3(max)

0.0015%

0.001%

Na2O(max)

0.003%

0.003%

TiO2(max)

0.0005%

0.0005%

Packing

25kg or 1000kg net in woven plastic bag with inner double plastic bags or packed as specified by the client.

Zr(Hf)O2

Fe2O3

SiO2

Na2O

TiO2

≥36.0

≤0.0002

≤0.0010

≤0.0005

≤0.0003

≥35.5

≤0.0002

≤0.0010

≤0.0005

≤0.0005

≥35.5

≤0.0002

≤0.0020

≤0.0005

≤0.0005

≥36.0

≤0.0010

≤0.0030

≤0.0010

≤0.0010

≥35.5

≤0.0010

≤0.0030

≤0.0010

≤0.0010

≥35.0

≤0.0015

≤0.0050

≤0.0030

≤0.0015

Packaging & Shipping


Package and Storage for Zirconium Oxchloride :

25kg or 1000kg net in woven plastic bag with inner double plastic bags or packed as the requirements of clients.

(1).To be protected from moist and prevent getting in touch with general metals in storehouse

(2).To make sure that the container does not leak, collapse, fall, or damage during transportation.Prevent heat, rain, sun exposure during transportation.Prohibit mixed loading and mixed transportation with oxidizing agent.

Zirconium Oxychloride


Zirconium Oxychloride, Cl2OZR, ZOC, ZROCL2.8H2O

Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com