What to prepare for a new tractor on the road

In order to ensure the safety of the agricultural hand and ensure the normal operation of the new agricultural machine, the new agricultural machine must be ready in time before use. The following example describes the tractor.

Tighten the connector

Although the tractor has passed the factory inspection, it will inevitably cause loose connections during repeated operation. For this purpose, various fasteners and fasteners should be tightened in time, especially the steering system, brake system, suspension, and wheels.

Check the liquid level

Mainly fuel tank oil level, water tank surface, transmission and rear axle lubricant oil level, and battery electrolyte level. When it is found that the liquid level is insufficient, the liquid material should be added in time.

Use oil properly

Before use, check the amount of oil in the oil pan, not less than the underline of the oil ruler. If the tractor is shipped from the factory in summer, and bought back in winter, it should be replaced with oil used in winter and vice versa. The switch of the oil filter on a large tractor should be switched to the "summer" or "winter" position depending on the season or the temperature. In order to prevent the oil in the oil-bath type air filter oil pan from splashing out and contaminating the vehicle capacity during operation, some manufacturers did not add it at the factory, and should pay attention to adding oil after buying it.

Do not relax

It is to make the speed of the new machine from low to high, the load from small to large, through the gradual operation process, the grinding marks on the friction surface of gears, shafts and other more polished. Running-in has an important effect on prolonging the service life of the parts. Do not neglect the running-in process for the sake of saving fuel and time. Otherwise, the machine will be damaged due to small losses.

Disposable Medical Face Mask

Ningbo DOKEE Medical Technology Co., Ltd. , https://www.dokeemedical.com